Skip to content

Testing your contributions

Each feature added to clan should be tested extensively via automated tests.

This document covers different methods of automated testing, including creating, running and debugging such tests.

In order to test the behavior of clan, different testing frameworks are used depending on the concern:

  • NixOS VM tests: for high level integration
  • NixOS container tests: for high level integration
  • Python tests via pytest: for unit tests and integration tests
  • Nix eval tests: for nix functions, libraries, modules, etc.

NixOS VM Tests

The NixOS VM Testing Framework is used to create high level integration tests, by running one or more VMs generated from a specified config. Commands can be executed on the booted machine(s) to verify a deployment of a service works as expected. All machines within a test are connected by a virtual network. Internet access is not available.

When to use VM tests

  • testing that a service defined through a clan module works as expected after deployment
  • testing clan-cli subcommands which require accessing a remote machine

When not to use VM tests

NixOS VM Tests are slow and expensive. They should only be used for testing high level integration of components. VM tests should be avoided wherever it is possible to implement a cheaper unit test instead.

  • testing detailed behavior of a certain clan-cli command -> use unit testing via pytest instead
  • regression testing -> add a unit test

Finding examples for VM tests

Existing nixos vm tests in clan-core can be found by using ripgrep: 

rg self.clanLib.test.baseTest

Locating definitions of failing VM tests

All nixos vm tests in clan are exported as individual flake outputs under checks.x86_64-linux.{test-attr-name}. If a test fails in CI:

  • look for the job name of the test near the top if the CI Job page, like, for example gitea:clan/clan-core#checks.x86_64-linux.borgbackup/1242
  • in this case checks.x86_64-linux.borgbackup is the attribute path
  • note the last element of that attribute path, in this case borgbackup
  • search for the attribute name inside the /checks directory via ripgrep

example: locating the vm test named borgbackup:

$ rg "borgbackup =" ./checks
./checks/flake-module.nix
44-            wayland-proxy-virtwl = self.clanLib.test.baseTest ./wayland-proxy-virtwl nixosTestArgs;

-> the location of that test is /checks/flake-module.nix line 41.

Adding vm tests

Create a nixos test module under /checks/{name}/default.nix and import it in /checks/flake-module.nix.

Running VM tests

nix build .#checks.x86_64-linux.{test-attr-name}
(replace {test-attr-name} with the name of the test)

Testing services with vars

Services that define their own vars (using clan.core.vars.generators) require generating test vars before running the tests.

Understanding the clan.directory setting

The clan.directory option is critical for vars generation and loading in tests. This setting determines:

  1. Where vars are generated: When you run update-vars, it creates vars/ and sops/ directories inside the path specified by clan.directory
  2. Where vars are loaded from: During test execution, machines look for their vars and secrets relative to clan.directory

Generating test vars

For services that define vars, you must first run:

nix run .#checks.x86_64-linux.{test-attr-name}.update-vars

This generates the necessary var files in the directory specified by clan.directory. After running this command, you can run the test normally:

nix run .#checks.x86_64-linux.{test-attr-name}

Example: service-dummy-test

The service-dummy-test is a good example of a test that uses vars. To run it:

# First, generate the test vars
nix run .#checks.x86_64-linux.service-dummy-test.update-vars

# Then run the test
nix run .#checks.x86_64-linux.service-dummy-test

Common issues

If update-vars fails, you may need to ensure that:

  • clan.directory is set correctly: It should point to the directory where you want vars to be generated (typically clan.directory = ./.; in your test definition)
  • Your test defines machines: Machines must be defined in clan.inventory.machines or through the inventory system
  • Machine definitions are complete: Each machine should have the necessary service configuration that defines the vars generators

If vars are not found during test execution:

  • Verify that clan.directory points to the same location where you ran update-vars
  • Check that the vars/ and sops/ directories exist in that location
  • Ensure the generated files match the machines and generators defined in your test

You can reference /checks/service-dummy-test/ to see a complete working example of a test with vars, including the correct directory structure.

Debugging VM tests

The following techniques can be used to debug a VM test:

Locate the definition (see above) and add print statements, like, for example print(client.succeed("systemctl --failed")), then re-run the test via nix build (see above)

Interactive Shell

  • Execute the vm test outside the nix Sandbox via the following command: nix run .#checks.x86_64-linux.{test-attr-name}.driver -- --interactive
  • Then run the commands in the machines manually, like for example: 
      start_all()
  machine1.succeed("echo hello")

Breakpoints

To get an interactive shell at a specific line in the VM test script, add a breakpoint() call before the line to debug, then run the test outside of the sandbox via: nix run .#checks.x86_64-linux.{test-attr-name}.driver

NixOS Container Tests

Those are very similar to NixOS VM tests, as in they run virtualized nixos machines, but instead of using VMs, they use containers which are much cheaper to launch. As of now the container test driver is a downstream development in clan-core. Basically everything stated under the NixOS VM tests sections applies here, except some limitations.

Limitations:

  • Cannot run in interactive mode, however while the container test runs, it logs a nsenter command that can be used to log into each of the container.
  • setuid binaries don't work

Where to find examples for NixOS container tests

Existing NixOS container tests in clan-core can be found by using ripgrep:

rg self.clanLib.test.containerTest

Python tests via pytest

Since the Clan CLI is written in python, the pytest framework is used to define unit tests and integration tests via python

Due to superior efficiency,

When to use python tests

  • writing unit tests for python functions and modules, or bugfixes of such
  • all integrations tests that do not require building or running a nixos machine
  • impure integrations tests that require internet access (very rare, try to avoid)

When not to use python tests

  • integrations tests that require building or running a nixos machine (use NixOS VM or container tests instead)
  • testing behavior of a nix function or library (use nix eval tests instead)

Finding examples of python tests

Existing python tests in clan-core can be found by using ripgrep: 

rg "import pytest"

Locating definitions of failing python tests

If any python test fails in the CI pipeline, an error message like this can be found at the end of the log: 

...
FAILED tests/test_machines_cli.py::test_machine_delete - clan_lib.errors.ClanError: Template 'new-machine' not in 'inputs.clan-core
...

In this case the test is defined in the file /tests/test_machines_cli.py via the test function test_machine_delete.

Adding python tests

If a specific python module is tested, the test should be located near the tested module in a subdirectory called ./tests If the test is not clearly related to a specific module, put it in the top-level ./tests directory of the tested python package. For clan-cli this would be /pkgs/clan-cli/clan_cli/tests. All filenames must be prefixed with test_ and test functions prefixed with test_ for pytest to discover them.

Running python tests

Running all python tests

To run all python tests which are executed in the CI pipeline locally, use this nix build command

nix build .#checks.x86_64-linux.clan-pytest-{with,without}-core

Running a specific python test

To run a specific python test outside the nix sandbox

  1. Enter the development environment of the python package, by either:
  2. Having direnv enabled and entering the directory of the package (eg. /pkgs/clan-cli)
  3. Or using the command select-shell {package} in the top-level dev shell of clan-core, (eg. switch-shell clan-cli)
  4. Execute the test via pytest using issuing pytest ./path/to/test_file.py:test_function_name -s -n0

The flags -sn0 are useful to forwards all stdout/stderr output to the terminal and be able to debug interactively via breakpoint().

Debugging python tests

To debug a specific python test, find its definition (see above) and make sure to enter the correct dev environment for that python package.

Modify the test and add breakpoint() statements to it.

Execute the test using the flags -sn0 in order to get an interactive shell at the breakpoint:

pytest ./path/to/test_file.py:test_function_name -sn0

Nix Eval Tests

When to use nix eval tests

Nix eval tests are good for testing any nix logic, including

  • nix functions
  • nix libraries
  • modules for the NixOS module system

When not to use

  • tests that require building nix derivations (except some very cheap ones)
  • tests that require running programs written in other languages
  • tests that require building or running NixOS machines

Finding examples of nix eval tests

Existing nix eval tests can be found via this ripgrep command:

rg "nix-unit --eval-store"

Locating definitions of failing nix eval tests

Failing nix eval tests look like this:

    > ✅ test_attrsOf_attrsOf_submodule
    > ✅ test_attrsOf_submodule
    > ❌ test_default
    > /build/nix-8-2/expected.nix --- Nix
    > 1 { foo = { bar = { __prio = 1500; }; } 1 { foo = { bar = { __prio = 1501; }; }
    > . ; }                                   . ; }
    >
    >
    > ✅ test_no_default
    > ✅ test_submodule
    > ✅ test_submoduleWith
    > ✅ test_submodule_with_merging
    >
    > 😢 6/7 successful
    > error: Tests failed

To locate the definition, find the flake attribute name of the failing test near the top of the CI Job page, like for example gitea:clan/clan-core#checks.x86_64-linux.eval-lib-values/1242.

In this case eval-lib-values is the attribute we are looking for.

Find the attribute via ripgrep:

$ rg "eval-lib-values ="
lib/values/flake-module.nix
21:        eval-lib-values = pkgs.runCommand "tests" { nativeBuildInputs = [ pkgs.nix-unit ]; } ''
grmpf@grmpf-nix ~/p/c/clan-core (test-docs)>

In this case the test is defined in the file lib/values/flake-module.nix line 21

Adding nix eval tests

In clan core, the following pattern is usually followed:

  • tests are put in a test.nix file
  • a CI Job is exposed via a flake-module.nix
  • that flake-module.nix is imported via the flake.nix at the root of the project

For example see /lib/values/{test.nix,flake-module.nix}.

Running nix eval tests

Since all nix eval tests are exposed via the flake outputs, they can be ran via nix build:

nix build .#checks.x86_64-linux.{test-attr-name}

For quicker iteration times, instead of nix build use the nix-unit command available in the dev environment. Example:

nix-unit --flake .#legacyPackages.x86_64-linux.{test-attr-name}

Debugging nix eval tests

Follow the instructions above to find the definition of the test, then use one of the following techniques:

Add lib.trace or lib.traceVal statements in order to print some variables during evaluation

Nix repl

Use nix repl to evaluate and inspect the test.

Each test consists of an expr (expression) and an expected field. nix-unit simply checks if expr == expected and prints the diff if that's not the case.

nix repl can be used to inspect an expr manually, or any other variables that you choose to expose.

Example:

$ nix repl
Nix 2.25.5
Type :? for help.
nix-repl> tests = import ./lib/values/test.nix {}

nix-repl> tests
{
  test_attrsOf_attrsOf_submodule = { ... };
  test_attrsOf_submodule = { ... };
  test_default = { ... };
  test_no_default = { ... };
  test_submodule = { ... };
  test_submoduleWith = { ... };
  test_submodule_with_merging = { ... };
}

nix-repl> tests.test_default.expr
{
  foo = { ... };
}